Consumer & Health Products
The home care and pharmaceutical industry is faced with increasing prices and stricter regulations. Additionally, there is an industrial push and a consumer demand to replace conventional components with biologically derived, sustainably sourced and biodegradable alternatives. However, this results in a number of challenges regarding product performance and stability.
Nucomat offers automated sample preparation solutions for automated quality control analysis of your products: e.g. high throughput screening, routine analysis of food products, formulation stability testing, biosafety and pathogen testing, etc.
The automated system allows for multi-parameter data collection on live pathogens of high or unknown biosafety risk.
The Caps_It system contains multiple customized subsystems to assure safe and efficient plate handling.
- Incubator assembly (4 systems)
- Liquid handler assembly (2 systems)
- High-content imager assembly (2 systems)
- Plate reader assembly (2 systems)
- Plate washer assembly (2 systems)
- Liquid waste handling assembly (2 systems)
- Dark plate store
The Caps-iT and MiniCaps system are integrated in an autonomous isolator system for P3 level biosafety containment. You can operate safely with high risk pathogens while working in a P2 lab.
See also: https://rega.kuleuven.be/cmt/capsit
Are you looking for a solution for precise and reliable small volume vial filling for your production line that only requires attention of the operators twice a day? Dealing with volumes between 100 µl and 2 ml, need ful data tracking? This filler unit may offer a quick solution to your needs.
Automated Stability Testing Platform for Liquid Formulations
This platform allows for automated stability testing of liquid formulations. The systems consist of 6 trolleys which can be equipped with advanced measurement techniques as well as a separate area with 4 climate chambers.
The advanced scheduling software controls the different ageing and measurement protocols for all samples.
Capacity of the system amounts to more than 1500 samples.
Automated Labeller and Dispenser
The automated system concerns a lab application to distribute liquid aliquots in microcentrifuge tubes of 0,5ml or 1,5 ml. Liquid transfer is performed under laminar flow. The system is able to provide individual tubes from a bulk feed, controlled liquid transfer on a balance and labelling of 120 samples per hour. A vibration hopper with capacity for 1200 tubes feeds closed microcentrifuge tubes to a vertical lift that brings the tubes within reach of the XYZ robot. New tubes coming from the vibrator are capped. The labelled tubes first get decapped, receive the aliquot volume, and afterwards capped again. Prepared tubes are exported in 13x13cm trays with 100 positions.